Size: 78 x 27 x 53 mm for 14/16/18/20 mm tubes or ant farm size
L
14/10 flexible tube is put tightly into socket 14mm
20/16 flexible tube is put tightly onto first 16mm stage
22/18 flexible tube is put tightly onto second 20mm stage
24/20 flexible tube is put loose-fitted onto second 20mm stage
Material: PMMA
Colours: crystal clear, grey
Contents: 1x gate valve
Description: The slide gate blocks or opens the passage of ants in a hose or between two formicaries.
It is transparent, so that you can check whether ants are in between when "closing". The slider is also used to control and regulate ant lines in tubes.
Note about usage
Due to the filigree design, the following must be observed when attaching or removing flexible tubes:
If the flexible tube is very difficult to fit on the connector socket, the socket should be lightly rubbed with a drop of our ant escape protection oil or powder. The flexible tube should then be pushed onto the connector socket by turning resp. screwing without loading the socket with up and down movements. The same applies when removing the flexible tube. Please do not just pull it out!
Update Info:
12/15/2020 Product improvement: Bars were reinforced by 3mm.
