Content:
1x ANTCUBE - Arena 20x20x10 - flat
1x ant arena frame 20x20
1x ant arena cover 20x20
1x ANTCUBE - ant farm - L - 20x20 - standing
1x ANTCUBE - cork nest 20x20 - standing
1x 0.5m hose, transparent 14/10 mm
1x ANTCUBE - red foil 20x20 - self-adhesive
1x soil - sand-loam beige - 1000g
1x grid insert - 50mm - stainless steel
1x Formicarium plug for 50mm hole
1x Formicarium plug for 27mm hole
1x mesh cap - 16mm - stainless steel
1x basin connector for hole 27 and hose 10-16 mm - M25
1x Formicarium nut M25 - gray
1x drinker 2ml - 360 degrees
1x feed dispenser 2ml - can be dosed
1x mini thermo-hygrometer analog - display - hanging
1x Ant breakout protection oil 10ml
1x tweezers spring steel - wide - soft
1x tweezers plastic transparent
1x plastic pipette 3ml
1x hand magnifier - 2-fold - 30mm
1x Food Mix Set - standard + sponge
1x foam wiper 150x18x2.5mm
Description:
This cork starter kit, with pre-fabricated corridors and chambers, is suitable for various species of ants, especially for species that nest in (dead) wood.
The "ANTCUBE - cork nest" can be used in the fully transparent farm. Alternatively, however, the "soil - sand-loam beige" can be used to fill the farm or to close some of the chambers of the cork nest. If necessary, additional modules can be connected via the 50mm holes in the cover, e.g. the separately available foggers, fans or lighting. Alternatively, suitable mesh inserts and formicaria stoppers for closing are included in the scope of delivery. Depending on your preference, the formicarium can also be operated openly by simply putting on the removable frame and applying the ant outbreak protection oil to the edge. The "Drinker 2ml - 360 degrees" is intended for water, the "Feeder 2ml - can be dosed" for the carbohydrate and protein powder. The "mini thermo-hygrometer analog - display - hanging" can be attached to the frame or the cover and shows the climate values.
Notes on manufacturing
The glass is cut to DIN 1249 with a tolerance of +/- 1mm. For extremely small ant species, additional escape protection is essential.
Notes on the farm
The nest can only be used in a dry formicarium. If the nest is kept permanently moist, the material can go moldy.
When attaching or removing hoses, the following must be observed:
If the hose fits very difficultly on the connection socket, the socket should be rubbed lightly with a drop of our breakout protection oil or powder. The hose should then be pushed onto the socket by turning or screwing movements without loading the socket with up and down movements. The same applies when removing the hoses from the connection socket on the farm. Please don't just pull it off!
Instructions:
- DE
Gebrauchsanweisung Starter Set Kork (PDF 3,80 MB)
- EN
Instructions for use - Starter Set Cork (PDF 3,79 MB)
- ES
Manual de instrucciones - Set de inicio de corcho (PDF 3,79 MB)
- FR
Manuel d'instruction - Kit de démarrage en liège (PDF 3,79 MB)