ANTCUBE - PF 20 L - ant - precious wood

Dimensions: 19x19x3,2cm; Through height 17mm; Through width 4-20mm with soft transition

Material: acrylic glass, clay, pvc foil

Color: crystal clear, precious wood print

Includes:
8x Acrylic plates 19x19cm (incl. clay board)
14x screws M4 in transparent
14x nuts M4 in transparent
2x connection sockets 14,16,20mm transparent
2x Formicarium cap for 16mm socket
1x frame ring
1x mesh insert 27mm made of stainless steel

Connection: 2x connection sockets 14,16,20mm for

14/10 hose is put tightly into socket 14mm
20/16 hose is put tightly onto first 16mm stage
22/18 hose is put tightly onto second 20mm stage
24/20 hose is put loose-fitted onto second 20mm stage

Description: Flat formicarium made of several layer plates and a special clay plate for nest humidification. The integrated connection sockets can be used to expand the formicarium via hoses or to connect it to an ant arena. In the middle part of the nest there is a free area which serves as access to the humidification plate, but is also suitable for the placement of food bowls. This free area is covered by a frame ring. (Optionally, this frame ring can be coated from the inner underside with a breakout protection agent (oil, varnish or powder). This prevents the animals from escaping through the opening. The grid insert with stainless steel gauze serves as a cover for the middle opening and ensures optimal ventilation in the process.

Application: for ants of size L

Note: Slots of 0.5mm can occur.

Note about the connection sockets
The following must be noted when attaching or removing flexible tubes:
If the flexible tube is very difficult to fit on the connector socket, the socket should be lightly rubbed with a drop of our ant escape protection oil  or powder. The flexible tube should then be pushed onto the connector socket by turning resp. screwing without loading the socket with up and down movements. The same applies when removing the flexible tube. Please do not just pull it out!