ANTCUBE - 3D 20 S - natural - brown

Dimensions: 19x19x1,6cm; Through height 3mm; Through width 4-20mm with soft transition

Material: acrylic glass, plaster

Color: Brown, transparent

Includes:
2x Acrylic plates 19x19cm (incl. Plasterboard)7
2x Nestig instert (big)
2x Neting insert (small)
14x screws M4 in transparent
14x nuts M4 in transparent
2x connection sockets 6mm transparent
2x Formicarium cap for 6mm socket
1x frame ring
1x mesh insert 27mm made of stainless steel

Connection: 2x connection sockets 6mm for hose 10 / 6mm

Description: Flatformicarium made of several layer plates and a special plasterboard for the wetness of the nest. Via the integrated connection sockets, the Formicarium can be extended via hoses or connected with an antsarena. In the middle part of the nest there is a free area which serves as an access to the humidification plate but is also suitable for the placement of feeding bowls. This free area is covered by a frame ring. (Optionally, this frame ring can be coated with an anti-corrosion agent (oil, varnish or powder) from the inner side of the frame so that the animals can not escape through the opening. With the time-consuming printing process desingns copied from nature could be manufactured. The nesting inserts possesses raw surfaces. To ensure a perfect view the bottom and the ceiling are made of acrylic glass with a smooth surface.

Application: for ants of size S

Note: Slots of 0.5mm can occur.