ANTSTORE World of Ants

[deansie26]

Hey, just sharing the set up for my new Atta's, got them this morning and really happy with them, they are looking great. Nice size garden with even what looks like a solider , first time seeing one.
The set up is quite simple at the moment,

Storage box wish a smaller storage box at the bottom that is filled with water and houses an aquarium heater set at 30 degrees.
Hyperlinks sind nur für registrierte Nutzer sichtbar

The box that houses the colony made up of John Innes No9 and coco fibre. Ive made 2 holes in the lid and 2 holes in the following boxes. I then silicone the boxes onto the lid. So one is a feeding the other possible dumping area.
Hyperlinks sind nur für registrierte Nutzer sichtbar

I put a little play sand the in the 2 boxes to help catch any drips/ humidity etc and sticks in the holes for the ant to climb up. I've also put small ventilation holes in both boxes in the lids.

Hyperlinks sind nur für registrierte Nutzer sichtbar

I also put some tin foil round the heating box to help insulate it as its a cold room but I left the front foil free for viewing and so the colony have light coming in.
Also got a temp gauge in there.
Hyperlinks sind nur für registrierte Nutzer sichtbar

Some pics of the queen and colony, even seen some brood
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar

Eventually will get a plastic shed in my back possible which ill insulate etc to house these colonys.

[adam james]

Looking good mate , don't let them reach 30c in that box though as the queen becomes sterile at that temperature. Best keep them between 24-27c as a good guide

Adam

[deansie26]

Thanks Adam, yeh I've read that can be a possibility. The 30 degrees doesn't translate in to ambient temp, I'm just under 25 at the minute so pretty good. I've a mat-stat on the way so may change to 2 heat mats, one on either side

[adam james]

Fantastic mate , good luck and its great to see another fellow Atta keeper , especially here in the uk

[AntsNational]

Nice colony! A little strange that there's such a large soldier in there, those shouldn't appear until the colony is well off. Perhaps these queens after collection were boosted with fungus from the original supplier's personal colony :p I wish you the best with your colony and I agree with Adam, don't let it get too hot in there!

Vas

[deansie26]

Quick update.
After receiving them and having a think about the set up I had made and what Adam had mentioned about temperature I decided not to use the set up and instead house them in an identical cube as I know these conditions are good and constant, I am just going to provide them with tile platforms for feeding at the moment. Sadly before I had chance to house the colony the queen died, that was pretty gutting. I contacted Andrew and he said these things can sometimes happen for no reason and replaced the colony which I was extremely grateful for.
So I added the new queen and fungus to the fungus and ants I already had and this has made for quite a few ants. He also advised me to remove the solider, It must have known as it was no where to be seen??? lol

I've put up a few new pics of the colony, initially with the first colony I had put the plastic tub directly in on its side but they had started to build a soil wall up against the opening. Andrew explained that Acromyrmex will move out to a better environment but atta will not so I made a hole in the soil and placed them in it. You can see the difference in the 2 pics (over 2 day period) in that they are slowly building the sides up and over.
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar

[deansie26]

Amazing difference in 3 days
Hyperlinks sind nur für registrierte Nutzer sichtbar
Hyperlinks sind nur für registrierte Nutzer sichtbar

[AntsNational]

It's truly amazing how the ants can construct a dome without the soil caving in. When the colony gets larger you'll see some interesting structures, they make bridges, domes, tunnels, ventilation shafts & exhaust pipes and garbage pits with complexity. Great photos keep them coming!

[deansie26]

Hi all, here's my new Atta (capital letter wood-ant lol) set up-is a rough job but you can get the idea, hope to do a refined one in the future.



Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar

Is a large diameter waste pipe with bendy vine leading from the nest to the feeding tank.

Holes drilled in the bottom of the white waste pipe to drain the water that gathers from condensation, it is then returned via a clear tube to the main container.

Can fit two cubes or an equivalent size tank.

[deansie26]

A few cool clips I've been trying to upload for 2 weeks- Some nice soilders )




Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar

[deansie26]

Hi folk, just a quick update. New baby on the way so ants are getting evicted to the garage. It gets really cold during the winter in there so need to get some good solutions for my acro's and atta's.
Anyway atta first- this is the unit I just had built for them. The guy who made it builds large cold frames for plants so I just asked if it was possible to get one built to specifications I'm looking for and hey presto.

Its a shell right now but it will be insulated inside with 50mm celotex and the glass is double glazing. Inside it will be heated with soil heating cable controlled with pulse stat. Garage also needs gaps all closed with expanding foam.

Its pretty large LXBXH 2M x 0.75M x 0.5M Can gauge size from my 16 month son on his zebra! lol.

Hyperlinks sind nur für registrierte Nutzer sichtbar

Hyperlinks sind nur für registrierte Nutzer sichtbar

[AntsNational]

That is awesome! AWESOME! Congratulations on the new upcoming arrival by the way!

[deansie26]

That is awesome! AWESOME! Congratulations on the new upcoming arrival by the way!

Thanks very much Vasile, on both fronts lol.

[AntsNational]

No problem haha! Mothers (and to-be-mothers) and ants don't mix! Continue on with the noble hobby!

[deansie26]

Hi, just a few photos of set up so far.



Insulated Unit with celotex and arranged large heating cable. Still to make a second ventilation hole with the hole saw drill, don't think ill be using a fan at the minute as don't think its necessary yet.



Acrylic housing assembled. Consists of a longer section of pipe that will go straight out of the left hand side to a feeding box (so I can feed them with out losing heat in set up.



3 plastic boxes, the small square one to be the queens chamber. Ill need to put up little bars like Adam did to ensure she stays in there. At the end ill probably fit a plastic bottle for the time being.

There plenty of scope for expansion and will just do so as the colony grows.



Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar



Hyperlinks sind nur für registrierte Nutzer sichtbar